Try to create a crush:.

Make sure that the brush is completely dry before re-inserting it into the vacuum though, otherwise more dirt will instantly stick to it.. Re-insert the brush bar into the vacuum.. You’ll need to insert the end of the brush opposite the side with the button first.Once that end has been inserted, gently push the brush until you hear a satisfying click..

Remember to replace the battery!.Keep in mind that the red lights indicating a blockage won’t switch off straight away.It’ll take around 10 seconds for the lights to go out and the vacuum to restart after the jam has been resolved.. Related Article:.

How to Empty The Gtech Multi Mk2.What Should I Do If The Brush Still Won’t Spin?.

If the brush won’t spin after removing any tangles, you should double-check that the brush bar has been re-inserted correctly.

The brush should click into place, so if it’s not clicking then something is wrong..The key is to not oversaturate the carpet, as this can make the damp smell worse..

Allow a few hours for the white vinegar to sit in the carpet the neutralise the odours.. Blot up the vinegar with a white microfibre cloth.Don’t rub or use a coloured cloth, as this can affect the carpet’s colour.. Open the windows and allow the carpet to completely dry.. Once the carpet has dried, vacuum the affected area again.. Keep in mind that your carpet will smell of vinegar while it’s drying.

This should disappear once the solution has dried though..White vinegar is safe for most carpets.