Loose clogs can often be removed by hand, although you may need to use a narrow brush or compressed air for awkward locations.. Where to Check for Clogging.

The most likely culprits are the main tube, outlet from the bin (you’ll need to remove the bin to access this), and inside the tools.. It’s also possible that hair has become tangled around the Power Brush brushroll.To fix this issue,.

remove the brush and carefully cut away hair.Gtech has made it easy to clean the Multi Mk2’s filter.Here’s a quick recap of the process:.

Remove the bin and pull out the filter..Tap off excess dirt into a bin (you may also want to tip loose dirt inside the filter housing into a bin).

Rinse the filter in cold water from a tap without a detergent.

If possible, rinse until the water runs clear.. Gently squeeze off excess water, then allow the filter enough time to dry fully.. Reinsert the filter into the bin and reattach the bin to the vacuum.. Do you have any questions about the Gtech Multi Mk2?Start by noting your vacuum’s make and model, then use this information to find the right replacement belt.

Every vacuum needs a belt of the right tension and size – you can’t just use any belt.. Unplug and switch off the vacuum.Then remove the base plate for full access to the brush..

Remove the brush bar and broken belt.Make sure to take note of how the belt attaches to the brush roll before removing it (take pictures so you don’t forget!).