We always recommend emptying bagless vacuums directly into an outdoor bin.

, make sure the machine is switched off and unplugged.You’ll be disassembling parts of the vacuum, so it’s important that there’s no risk of an electric shock..

The first step is to remove the canister and check the main suction tubes for any blockages.A clog or blockage on either the entrance or exit tube from the canister can greatly affect suction power, so this is an important location to check..There are generally three places you can check once the dust canister has been removed:.

The entrance vent to the dust canister..The tube that exits the dust canister.. A third tube that’s often hidden behind a transparent hatch..

Step 2: Check the Brush Roll for Blockages.

One of the most common places for a blockage or tangle is the brush roll.. Start by removing the floorhead from the main vacuum, then flip the two tabs to remove the bottom plate.Even after checking for these issues, it’s still worth contacting a vacuum repair shop if your vac has stopped working.

They may be able to fix the issue for a much lower cost than purchasing a new vacuum cleaner.. Related:.If you’re certain that your vacuum cleaner is broken,.

make sure you dispose of it correctly.Vacuum cleaners last a long time.